How To Scan Your Local And Remote Subnets For Mac Address, DNS, Network Card Manufacturer, And Manufacturer’s Address? 3 Easy Steps

In this blog post, we will show you how to scan your local and remote subnets for mac address, DNS, network card manufacturer, and manufacturer’s address.

scan-your-local-and-remote-subnets-for-mac

Step 1: Scan Your Local Subnet

  1. To scan your local subnet for devices and addresses, open the “System Preferences” application on your Mac. Select the “Network” icon, and then select the “Scan For Devices” option. This will launch a scan of all devices connected to your Mac, including any network cards and other devices connected to your network.
  2. You can also use a tool like nslookup or dig to lookup device addresses or IP addresses on your local network. For example, to lookup the IP address for a particular device on your local network, type nslookup -query=device in Terminal (press Return once you have entered the correct information).
  3. If you want to scan your network for devices and addresses in free, but don’t want to launch a full scan of your Mac’s connected devices, you can use the Network . For example, you can specify that only devices with a specific MAC address or IP address are scanned.

Step 2: Scan Your Remote Subnet

  1. To scan your remote subnet for devices and addresses, open the “System Preferences” application on your Mac. Select the “Network” icon, and then select the “Scan For Devices” option. This will launch a scan of all devices connected to your Mac, including any network cards and other devices connected to your network.
  2. You can also use a tool like nslookup or dig to lookup device addresses or IP addresses on your remote network. For example, to lookup the IP address for a particular device on your remote network, type nslookup -query=device in Terminal (press Return once you have entered the correct information). “Network Preferences” application to set specific criteria for the scan. For example, you can specify that only devices with a specific MAC address or IP address are scanned.

Step 3: Compare the Results

In Step 3, you will compare the results of your local and remote scans to find the MAC address, DNS, and network card manufacturer for each device.

The process of finding the MAC address is simple. You will need to open a command prompt or terminal on your computer and type “mac address”. This will return a list of all the devices on your local network with their MAC addresses.

Scan Your Local And Remote Subnets For Mac Address

To find the DNS information for a device, you will need to open a command prompt or terminal on that device and type “nslookup”. This will return information about the IP addresses for that device as well as its DNS servers.

To find the network card manufacturer for a device, you will need to open a command prompt or terminal on that device and type “ip Config”. This will return information about the IP address, subnet mask, and gateway for that device.

scan-your-local-and-remote-subnets-for-mac

Scan Your Local And Remote Subnets For Mac [FAQs]

How do you find the subnet mask of an IP address free?

To find the subnet mask for an IP address, you will need to open a command prompt or terminal on that device and type “ip Config”. This will return information about the IP address, subnet mask, and default gateway for that device.

How do I scan a range of IP addresses using Nmap free?

You can scan a range of IP addresses using Nmap by entering the following command into a command prompt or terminal on your computer:
nmap -sP 192.168.1.1-192.168.255.254

What is Nmap port scan?

Nmap port scan is a utility that can be used to find open ports on a computer. It is used for security auditing and network exploration.

How do I scan for open ports on my network free?

You can scan for open ports on your network by entering the following command into a command prompt or terminal on your computer:
NC -z -p 1-65535

What is a ping scan?

A ping scan is a utility that can be used to test the reachability of remote hosts. It is used for troubleshooting connectivity issues.

Conclusion:

By following these simple steps, you can ensure that your network is running smoothly and that all devices are connected correctly.

Some Other Software With Guide

Leave a Comment